Important Warning - Robot Coupe R 2 N Ultra Manual

WARNING: In order to limit accidents such as electric shocks or personal injury, and in order to limit material damage due to misuse of the
appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your
appliance and enable you to use the equipment correctly. Please read these instructions in their entirety and make sure that anyone else who
may use the appliance also reads them beforehand. Our equipment is designed for professional use and must not be used by children under any
circumstances.
UNPACKING
• Carefully remove the equipment from the packaging
and take out all the boxes or packets containing
attachments or specific items.
• WARNING - some of the tools are very sharp e.g.
blades, discs... etc.
• Store manuals, tools and spare parts in a safe
place available to the users of the machine.
INSTALLATION
• Install the machine on a clear counter space with
sufficient room to safely operate and clean the
machine.
CONNECTION
• Always check that your power supply corresponds
to that indicated on the identification plate on the
motor unit and that it can withstand the amperage.
• The machine must be grounded.
• Always check that the motor shaft rotates in
anticlockwise direction before the blades are
installed.
• Always take care when handling the blades, as
they are extremely sharp.
• Wear cut-proof gloves when handling the blades.

IMPORTANT WARNING

• Follow the various assembly procedures carefully
(see page 6) and make sure that all the attachments
are correctly positioned.
• Never try to override the locking and safety systems.
• Never insert any object into the container where
the food is being processed.
• Never push the ingredients down with your hand.
• Do not overload the appliance.
• Maximum fill level is ⅔ full, less if the product is
very dense or sticky.
• As a precaution, always unplug your appliance
before cleaning it.
• Always clean the appliance and its attachments at
the end of each cycle.
HANDLING
• Never immerse the motor base in water.
• For parts made from aluminum, use metal safe
detergents intended for aluminum.
ASSEMBLY PROCEDURES
USE
CLEANING
W A R N I N G
KEEP THESE INSTRUCTIONS IN A SAFE PLACE
• Caustic detergents used in automatic dishwashers
quickly degrade plastic parts. Hand wash plastic
parts if possible.
• Robot-Coupe can in no way be held responsible for
the user's failure to follow the basic rules of cleaning
and hygiene.
MAINTENANCE
• Do not open the motor housing. There are no
user serviceable components inside the electrical
housing. Refer control component repairs to qualified
technicians.
• Remove and clean shaft seals monthly. Replace
seals every 3 to 6 months. Lubricate with food safe
grease.
• It is particularly important to maintain and check
the attachments since certain ingredients contain
corrosive agents, e.g. citric acid.
• Never operate the appliance if the power cord or
plug has been damaged or if the appliance fails to
work properly or has been damaged in any way.
• If the machine malfunctions in any way discard any
food being processed and refer service to qualified
maintenance technicians.
5
12/07/2018