Motor base IMPORTANT WARNING • Bowl cutter attachment • Vegetable preparation attachment INTRODUCTION TO YOUR NEW • Blade R 401 • R 402 • R 402 V.V. MAINTENANCE BOWL CUTTER/VEGETABLE PREPARATION • Blade SWITCHING ON THE MACHINE • Motor seal •...
ROBOT-COUPE ., LIMITED WARRANTY Labour to sharpen and/ or replacements SHIPPING DAMAGES. Visible and latent for blades which have become blunt, chipped or defects are the responsibility of the freight car- Your new ROBOT-COUPE appliance is worn after a normal or excessive period of use. rier.
Page 4
RECOMMENDATIONS CONCERNING THE INSTALLATION OF VARIABLE-SPEED APPLIANCES AND PERSONAL SAFETY These recommendations apply to machines equip- • You must connect the machine to a 200-240 V / 50 • Several variable-speed appliances are connected ped with an induction motor and a single-phase or 60 Hz single-phase* alternating current supply to the same GFCI.
W A R N I N G IMPORTANT WARNING KEEP THESE INSTRUCTIONS IN A SAFE PLACE WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will help you get to know your appliance and enable you to use the equipment correctly.
(risk of electrocution). SINGLE PHASE R 401 • ADVICE ON ELECTRICAL CONNECTIONS The R 401 are fitted with various types of motors: The food processor is perfectly geared to professional Before plugging in, check that your power supply 230 V / 50 Hz / 1 needs.
ASSEMBLY 4) Place the lid on the bowl 3) Engage the white plastic sling plate on the motor and rotate to the right until shaft and check that it is it clicks. • CUTTER BOWL ATTACHMENT properly positioned at the bottom of the bowl.
(You must be • FISH able to see the grid Brandade 3000 For both R 401, R 402 and R 402 V.V. models: blades when looking Terrines 3000 into the tube.) 5) Place the lid on the bowl and rotate to the •...
This blade beet root / potato / carrot has the same function as a The cutter version of the R 401 / R 402 / R 402 V.V. GRATERS straight blade. It has been has numerous other applications. The above quanti-...
Some washing agents are too alka- • ELECTRICAL DATA line (e.g. high levels of caustic soda or ammonia) and totally incompatible with certain types of TECHNICAL R 401 single-phase machine plastic, causing them to deteriorate rapidly. SPECIFICATIONS Speed Power...
Never switch the appliance on while it is empty. SAFETY STANDARDS The R 401 / R 402 / R 402 V.V. are fitted with a magnetic safety device and motor braking system. MACHINES IN COMPLIANCE WITH: As soon as you open the cutter lid, the motor stops.
Page 23
MADE IN FRANCE BY ROBOT-COUPE Export Department Tel. : + 33 1 43 98 88 33 - Fax : + 33 1 43 74 36 26 48, rue des Vignerons - BP 157 94305 Vincennes Cedex - France http://www.robot-coupe.com - email : international@robot-coupe.com We reserve the right to alter at any time without notice the technical specifications of this appliance.