Delete Storage Medium - Siemens SIMATIC HMI TP27 Equipment Manual

9.2

Delete Storage Medium

Delete flash /
It is not normally necesary to delete the memory.
memory card
Deletion produces a definied initial state on the memory media.
Note
If a memory card is inserted in the Touch Panel, this function deletes the con-
tents of the memory card.
If no memory card is inserted in the Touch Panel, this function deletes the
contents of the internal flash.
During the deletion process, all data is cleared from the data medium.
Procedure for In order that the configuration on the TP is not deleted inadvertently, several
deleting
separate touches are necessary simultaneously on the screen. Proceed as
follows to delete the memory:
1. Touch the top left corner of the screen as the Touch Panel is starting up.
Figure 9-1
2. Touch the lower left corner area of the screen. When using the TP27–10, it
3. Confirm the second confirmation request using the OK button.
TP27, TP37 Equipment Manual
Release 01/00
The menu illustrated in figure 9-1 appears with the first confirmation
request.
Copyright (c) SIEMENS AG 1997
ALL DATA ON FLASH/MODULE WILL BE ERASED !
ARE YOU SURE ?
SERIAL DOWNLOAD
Settings in the startup phase (example: clear flash memory)
is also necessary to touch the OK button. Touching any other area of the
screen subsequently stops the deletion procedure.
Storing and Loading Data
SIMATIC TP37, V x.xxx
OK
BOOT CONFIGURATION
CANCEL
9-3