Testing A Configuration In Offline Mode - Siemens SIMATIC HMI TP27 Equipment Manual

13.4

Testing a Configuration in OFFLINE Mode

Purpose
In operating mode OFFLINE, individual functions and configurations down-
loaded from the PC/PG to the Touch Panel can be tested without being in-
fluenced by the PLC. PLC tags are not updated in OFFLINE mode.
Action
End of test
If faults occur when executing the individual steps, download the configuration
again.
TP27, TP37 Equipment Manual
Release 01/00
Step
1 Set the TP27, TP37 to OFFLINE mode using the System Settings
standard screen.
2 Check all the configured screens in respect of correct presentation.
3 Check the screen hierarchy.
4 Check the input fields.
5 Test the buttons.
Commissioning
Action
13-9