Connectors And Adjusters - Siemens SIMATIC HMI TP27 Equipment Manual

Options
17.1.2

Connectors and Adjusters

Each DKM board has
When installed, the pin array and DIL switch are on the rear side of the Touch
Panel (illustrated in an example of the TP37 in figure 17-4).
Figure 17-4 Location of the connection and adjustment elements (example TP37)
17-4
a 10–pin array for connecting the outputs and external voltage supply, and
a DIL switch for configuring the outputs so that they can be set by the soft-
ware.
DIL switch
DKM
DKM B
B
Pins
DKM A
DKM A
TP27, TP37 Equipment Manual
Release 01/00