Introductory Information; Product Information - Viessmann Vitoconnect OPTO2 Series Operating Instructions Manual

Intended use
(cont.)
Installation, service and operating instructions that are
included with the products and are available online
must be observed.
Use Vitoconnect products exclusively for monitoring,
operating and optimising systems with the user interfa-
ces and communication interfaces specified for this
purpose in the relevant printed documentation. With
regard to the communication interfaces, ensure on site
that the system requirements specified in the product
documentation are met at all times for every transfer
medium employed (e.g. required WiFi connection to a
WiFi router).

Product information

Vitoconnect is a wall mounted internet interface for
communication with the boiler control unit of the heat
generator.
Vitoconnect enables remote control of heating systems
via the internet. Settings and checks are made via the
ViCare app.
Alternatively, the heating system can be controlled
remotely by the contractor using Vitoguide.
Vitoconnect, type OPTO2
The Vitoconnect, type OPTO2, can be used for single
boiler systems with an Optolink interface.
Spare parts lists
Information about spare parts can be found on the
Viessmann spare parts app.
Only use the specified components for the power sup-
ply (e.g. plug-in power supply units).
Note
The devices are intended exclusively for domestic or
semi-domestic use, i.e. even users who have not had
any instruction are able to operate the devices safely.
Vitoconnect, type OT2
The Vitoconnect, type OT2, can be used for single
boiler systems with an OpenTherm interface.
After commissioning Vitoconnect, type OT2, the heat
generator is operated exclusively via the ViCare app.
Room temperature settings can also be made via the
Vitotrol 100, type OT1.

Introductory information

7