Control Functions; Access Point Mode - Viessmann Vitoconnect OPTO2 Series Operating Instructions Manual

Hide thumbs Also See for Vitoconnect OPTO2 Series:
Table of Contents

Advertisement

Adjusting room temperature temporarily
Only in conjunction with Vitoconnect, type OT2
If you want to heat your rooms to a higher or lower
temperature for a limited time period, independently of
"Time program", activate "Comfort mode".
Setting Comfort mode
Press operating button
A
ond, but no longer than 5 seconds: See chapter "Dis-
play and controls".
LED
pulsates white:
"Comfort mode" is on.
Ending Comfort mode
About the Vitoconnect or Vitotrol
You have 4 options for ending "Comfort mode":
Press operating button
A
1 second, but no longer than 5 seconds: See chapter
"Display and controls".
Or
"Comfort mode" ends automatically when the set
room temperature is changed via the Vitotrol 100,
type OT1.
Or
"Comfort mode" ends automatically when the Vito-
connect restarts.
Or
"Comfort mode" ends automatically after 24 hours
(delivered condition).

Access point mode

Activate access point mode for the device so that you
can access legal information online, e.g. open source
licences, or to change the WiFi router settings.
Enabling access point mode
Press and hold down
for longer than 5 seconds, but
A
no longer than 30 seconds: See chapter "Display and
controls".
LED
illuminates green:
Access point mode is active.
Disabling access point mode
1. Access point mode is disabled automatically after
5 minutes.
Or
and hold for approx. 1 sec-
again briefly for approx.
The rooms are heated to the set "Comfort mode"
temperature.
Firstly, the DHW is heated to the set DHW tempera-
ture, before central heating.
About the ViCare app
You have 2 options for ending "Comfort mode" via the
ViCare app:
Tap "Manual" "CLOSE".
Or
"Comfort mode" ends automatically if the operating
program is changed via the ViCare app.
Enable access point mode, e.g. after replacing the
WiFi router.
2. Press and hold down
5 seconds, but no longer than 30 seconds: See
chapter "Display and controls".
LED
no longer illuminates green.
Access point mode is disabled.

Control functions

again for longer than
A
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vitoconnect ot2

Table of Contents