Intended Use - Viessmann Vitoconnect OPTO2 Series Operating Instructions Manual

Introductory information
Disposal of packaging
Please dispose of packaging waste in line with statu-
tory regulations.
Symbols
Symbol Meaning
Reference to other document containing
further information
Step in a diagram:
1.
The numbers correspond to the order in
which the steps are carried out.
Warning of material losses and environ-
mental pollution
Live electrical area
Pay particular attention.
Component must audibly click into place.
■
or
Acoustic signal
■
Fit new component.
■
or
In conjunction with a tool: Clean the sur-
■
face.
Dispose of component correctly.
Dispose of component at a suitable collec-
tion point. Do not dispose of component in
domestic waste.
Contractor
Activities that may only be carried out by the con-
tractor are indicated with this symbol.

Intended use

Install and operate Vitoconnect products as intended,
exclusively in conjunction with the electronic control
units and controllers of the supported Viessmann heat
and power generators.
6
Work on electrical equipment may only be carried out
by a qualified electrician.
Vitoconnect products are designed exclusively for
operation in buildings of a domestic or business
nature. Incorrect use of the devices is prohibited and
will result in an exclusion of liability (e.g. commercial or
industrial use other than for control purposes).