Download Print this page

Cleaning And Care; Cleaning; Humidity; Transport And Storage - dehn PHV 1 P Instructions For Use Manual

Single-phase phase comparator with electronic indicator and visual and acoustic indication, nominal voltage up to 36 kv / 50 hz

Table of Contents

Available languages

9. Cleaning and care

Basically, the phase comparator must be handled with care.

9.1

Clean soiled phase comparators using a lint-free damp cloth (e.g. wash leather) before and after each

use. No cleaning agents or solvents may be used to clean the device. The membrane in the sound outlet

is extremely sensitive and must neither be cleaned nor contacted in any other way and must be regu-

larly checked for signs of damage.

9.2

Damp, wet or condensed phase comparators (e.g. as a result of extreme temperature fluctuations)

must be wiped clean before and after use. If required, wait until the phase comparator has reached the

ambient temperature.

Transport and store phase comparators in a dry place and ensure that their performance is not com-

promised. Clean all components using a lint-free damp cloth. Solvents or aggressive cleaning agents

must not be used.

Phase comparators should be transported in a transport case, storage device or protective cover.

The temperature and air humidity prescribed by the climatic category must be complied with during

transport and storage (see 2.11).

Table of Contents

Table of Contents