Drilling; Hammer Drilling; Care And Maintenance Of Cordless Tools; Transport And Storage Of Cordless Tools - Hilti SF 2H-A User Manual

2. Set the torque setting ring to the desired torque.
3. Set the forward/reverse switch to the desired direction of rotation.

5.12 Drilling

1. Set the function selector ring to the "drilling" position
2. Set the forward/reverse switch to the "forward" position.

5.13 Hammer drilling

1. Set the function selector ring to the "hammer drilling" position
2. Set the forward/reverse switch to the "forward" position.
6

Care and maintenance of cordless tools

WARNING
Risk of injury with battery inserted !
▶ Always remove the battery before carrying out care and maintenance
tasks!
Care and maintenance of the tool
• Carefully remove stubborn dirt from the tool.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these may attack the plastic parts.
Care of the Li­ion batteries
• Keep the battery free from oil and grease.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these may attack the plastic parts.
• Avoid ingress of moisture.
Maintenance
• Check all visible parts and controls for signs of damage at regular intervals
and make sure that they all function correctly.
• Do not operate the cordless tool if signs of damage are found or if parts
malfunction. Have the tool repaired by Hilti Service immediately.
• After cleaning and maintenance, fit all guards or protective devices and
check that they function correctly.
7

Transport and storage of cordless tools

Transport
CAUTION
Accidental starting during transport !
▶ Always transport your products with the batteries removed!
▶ Remove the battery.
▶ Transport the tool and batteries individually packaged.
Printed: 07.01.2019 | Doc-Nr: PUB / 5245418 / 000 / 03
.
.
English 15