Sunny Health & Fitness SF-RB4806 User Manual page 8

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at
(877-907-8669).
#10 M8*16 6PCS
#11 d8*Φ20*2*R30 2PCS
#34 d8*Φ16*1.5 4PCS
#3 M5*40*Φ8 1PC
#4 d5*Ф20*R30*1.5 1PC
#92 S6 1PC
#93 S13-14-15 1PC
3 4
12
10
34
34
10 11
15
14
17
A
15
14
B
12
6
17
6
5
3 4
12
10
C
13
5
16
6
D
5
6
support@sunnyhealthfitness.com
STEP 2:
13
Remove 6 Bolts (No. 10), 2 Arc Washers (No. 11),
and 4 Washers (No. 34) from Main Frame (No. 17)
16
using Allen Wrench (No. 92).
Connect Sensor Wire (No. 16) with Sensor Wire
6 Extension (No. 13) and connect Pulse Wire (No.
14) with Pulse Wire Extension (No. 15) as shown
in picture A. Pull out the Lower Wire (No. 6) from
the hole of Main Frame (No. 17), then insert the
Lower Wire (No. 6) into the bottom hole of the
Handlebar Post (No. 12) and go out through the
5
side hole of the Handlebar Post (No. 12) as shown
in picture B.
6
Attach Handlebar Post (No. 12) to Main Frame
(No. 17) using 6 Bolts (No. 10), 2 Arc Washers
(No. 11), and 4 Washers (No. 34) that were
removed. Tighten and secure with Allen Wrench
(No. 92).
Note: Do not clip the wires when assembling the
Handlebar Post (No. 12).
Remove 1 Bolt (No. 3) and 1 Arc Washer (No. 4)
from Tension Control Knob (No. 5) using
Spanner (No. 93).
Check the Tension Control Knob (No. 5) is at
level 8 (highest resistance) to ensure the wire is the
longest. Connect Tension Control Knob (No. 5)
with Lower Wire (No. 6) as shown in picture C,
then back Lower Wire (No. 6) into Handlebar Post
(No. 12).
Note: When the Lower Wire (No. 6) is backed into
Handlebar Post (No. 12), the direction should be
correct as shown in picture D.
Attach Tension
Handlebar Post (No. 12) using 1 Bolt (No. 3) and
1 Arc Washer (No. 4) that were removed. Tighten
and secure with Spanner (No. 93).
7
or 1-877-90SUNNY
Control Knob (No. 5) to