Precaution; Setting The Switch; Order Of Adjustments; Subjects - Sony DCR-TRV16 Service Manual

1-1-3.

Precaution

1. Setting the Switch

Unless otherwise specified, set the switches as follows and perform adjustments without loading cassette.
1. POWER switch (PS-CX2670 block) ..................... CAMERA
2. NIGHT SHOT switch (Lens block) ................................. OFF
3. FOCUS switch (KP-CX2670 block) ..................... MANUAL
4. BACK LIGHT switch (KP-CX2670 block) ..................... OFF
5. COLOR SLOW S/ SUPER NS switch (JK-218 board) ... OFF
6. DEMO MODE (Menu setting) ........................................ OFF
7. STEADY SHOT (Menu setting) ...................................... OFF
8. DIGITAL ZOOM (Menu setting) .................................... OFF

2. Order of Adjustments

Basically carry out adjustments in the order given.
Color bar chart (Color reproduction adjustment frame )
H
A B
A=B
Fig. a
(Video output terminal
output waveform)

3. Subjects

1) Color bar chart (Color reproduction adjustment frame)
When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 5-1-4. (Color reproduction
adjustment frame)
2) Clear chart (Color reproduction adjustment frame)
Remove the color bar chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations during
this time.)
3) Flange back adjustment chart
Make the chart shown in Fig. 5-1-5 using A0 size (1189mm ×
841mm) black and white vellum paper.
DCR-TRV16/TRV16E/TRV18/TRV18E/TRV116E/TRV118E
C C=D
V
A
B
Enlargement
Difference in level
A
B
Fig.5-1-4.
9. 16 : 9 WIDE (Menu setting) ............................................ OFF
10. PROGRAM AE (Menu setting) ................................... AUTO
11. PICTURE EFECT (Menu setting) ................................... OFF
12. DIGITAL EFECT (Menu setting) .................................... OFF
13. WHITE BALANCE (Menu setting) ............................ AUTO
14. AUTO SHUTTER (Menu setting) ................................... OFF
15. DISPLAY (Menu setting) .................................. V-OUT/LCD
16. DISPLAY (CK-108 board) ............................................... ON
Electronic beam scanning frame
D
Fig. b (TV monitor picture)
Adjust the camera zoom and direction to
obtain the output waveform shown in Fig. a
and the TV monitor display shown in Fig. b.
Black
Note: Use matte vellum paper bigger than A0, and make sure the edges of
the black and white paper joined together are not rough.
5-7
CRT picture frame
White
841mm
1189mm
Fig. 5-1-5.