5.4. Read Only Parameter Access
Press and hold the
Use the up and
Navigate key > 2
down keys to select
seconds
P-00
5.5. Resetting Parameters
Press the Stop key.
The display will
show ""
To reset parameter
values to their
factory default
settings, press and
hold Up, Down and
Stop buttons for > 2
seconds.
The display will
show ""
5.6. Resetting a Fault
Press the Stop key.
The display will
show ""
www.invertekdrives.com
Press the Navigate
Use the up and
key for < 1 second
down keys to select
the required Read
Only parameter
Press the Navigate
key for < 1 second
to display the value
Version 2.00 | Optidrive ODE-3 User Guide | 21
Press and hold the
Navigate key > 2
seconds to return
to the operating
display
5
Need help?
Do you have a question about the Optidrive E3 and is the answer not in the manual?