Installation; Clearances - State Water Heaters SandBlaster SBD71 120 Service Handbook

This portion of the handbook will review some often overlooked installation considerations,
taking note of necessary installation requirements for the SBD 71120 through SBD 85500
model heaters. The installation manual covers most of these items in detail.
MODEL
120 - 200
250 - 305
365 - 400
500
A 24 inch clearance for all serviceable parts is recommended. Clearances may vary
between SBD models – See instruction manual or the label on the heater, for clearances
applicable to your specific model.
*20" (50.8CM) for 500 models.
Technical Training Department
Ashland City, TN ©2003
SBD TANK TYPE HEATERS
SERVICE HANDBOOK

INSTALLATION

CLEARANCES FROM COMBUSTIBLES
Clearance to Combustibles Table
A
1" (2.54CM)
2" (5.08CM)
3" (7.75CM)
5" (12.7CM)
3
B
1" (2.54CM)
2" (5.08CM)
3" (7.75CM)
5" (12.7CM)
C
1" (2.54CM)
2" (5.08CM)
3" (7.75CM)
5" (12.7CM)