State Water Heaters SBD30 150 NE Specifications

SANDBLASTER
Self-Cleaning Commercial Gas Water Heaters
®
Sandblaster Booster commercial gas water heaters are designed to provide high temperature water (usually 180ºF)
to commercial dishwashers. In these applications, the booster water heater is installed in conjunction with a standard
water heater, which delivers lower-temperature water to serve the non-dishwashing needs of a restaurant or other
foodservice application.
SANDBLASTER
¤
For more Information on the Sandblaster
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800-365 0024 Toll-free USA
www.statewaterheaters.com
SCGSS00105 July 2007R
®
State Hydro Cannon
• Significantly reduces buildup of lime, sand and other sediment in the tank
• Helps water heaters retain their rated efficiency longer and last
longer, with low water heating costs
Induced-Draft Design
• Built-in blower produces power-induced draft of makeup air prior to burner
ignition, for more efficient control of heat through the flue collector
• Eliminates performance problems caused by negative indoor air pressure
• Requires no draft hood or barometric damper
Rated as Category 1 Appliance
• Can be commonly vented with other Category 1 appliances, using standard
metal type "B" vent
Multiple Anode Rods
• Protects tank from corrosion
Three Water Connection Options
• Hot and cold water connections can be made through top, front or rear
of water heater
• Hydro Cannon device operates when front cold water connection is used
Intermittent Electronic Ignition
• Provides flame failure response in less than one second
• Includes power ON/OFF switch
• Eliminates standing pilot
Factory-installed Temperature and Pressure Relief Valve
Maximum Hydrostatic Working Pressure: 160 psi
80% Thermal Efficiency
Meets ASHRAE/IESNA 90.1-1999
• Also, design-certified by CSA International, according to to ANS Z21.10.3
standards governing storage-type water heaters
contact:
®
C O M M E R C I A L
BOOSTER
MODELS
Self-Cleaning Device
™