Settings Menu; Status; Time; Language - Tylo h1 Installation And Operating Instructions Manual

Settings menu

Settings menu Settings menu Settings menu
The settings menu gives you access to extra functions that are useful for setting various
parameters and rectifying any problems that may arise. You can also use this menu to reset h1
to its factory default settings. The following submenus are available:
Status – displays current temperature and time.
Time – sets clock.
Language – changes language setting.
Display – adjusts brightness of display and delay before screen goes into sleep mode.
Service – additional parameter settings.

Status

Status Status Status
Shows time and temperature in the same format as on the basic menu (fig. 7) even if the unit is
switched off.

Time

Time Time Time
Set the current time by adjusting each figure up or down with the arrow keys (6 and 9).
Confirm with OK.

Language

Language
Language Language
Select the desired language by moving up and down with the arrows. Confirm with OK.

Display

Display Display Display
Sleep – Set how many seconds are to elapse before the screen goes into sleep mode.

Service

Service
Service Service
You can use the service menu to change, for example, the parameters set during the initial
installation process. To access the service menu you need to key in code 124. The following
submenus are available:
Max time Max time
Max time Max time
– Set desired running time.
Max temp Max temp Max temp Max temp
– Set maximum programmable temperature. (Default settings are 110°C [230° F]
for sauna heaters and 55°C [130° F] for steam generators).
° ° ° ° C or C or ° ° ° ° F F F F
C or C or
– Display temperature in Celsius or Fahrenheit.
14