GAELCO ATV TRACK Operator's Manual page 45

GAELCO - ATV QUADS TRACK
9.7 DISASSEMBLING AND ASSEMBLING THE THROTTLE
Follow the procedure below when disassembling the throttle (e.g. when checking the
potentiometer, etc.):
1) The first step is to loosen the grub screw on the top cover (see line drawing). There is
a seating for the grub screw in the handlebar tube. The seating stops the whole assembly
turning when force is used to work the throttle.
2) Remove the two screws holding the covers to the tube. The lower cover comes away
easily whereas the upper cover tends to remain stuck to the throttle recovery mechanism.
To remove the top throttle cover, turn the throttle anti-clockwise while holding the cover with
the other hand. When the cover is freed from the throttle, it will hang from the start button
cable.
45