GAELCO ATV TRACK Operator's Manual page 37

GAELCO - ATV QUADS TRACK
Checking the rollers
3) Tighten the top screws and re-check the pressure of the rollers against the chain. If
they cannot be turned by hand, they are pressing too hard against the chain. If this is the
case, repeat the process again, this time loosening the side screws a little. Once again,
tighten the top screws and check the pressure by turning the rollers by hand. Repeat the
process as many times as is required until the criteria set out in Step 2 are met.
37