GAELCO ATV TRACK Operator's Manual page 29

GAELCO - ATV QUADS TRACK
6.7 TRANSFER OF THE PROGRAM VERSION
The option EXPORT PROGRAM should be used when two machines are linked and
their program versions are different. In such a case, the updated version must be loaded
on the PCB that has the older version. The data transfer is done from the machine with
the updated program, following the instructions shown on the screen:
RECORDING PROCESS
1. Switch off the other machine
2. Switch on again with the Service button pressed
Press Start Button to record
Press any brake lever to ABORT the process
The recording process starts when the Start button is pressed, and it lasts about 5
minutes. If anything goes wrong, an error message will appear on the screen. When the
process ends successfully, press any of the brake levers to return to the Main Menu
29