GAELCO ATV TRACK Operator's Manual page 36

GAELCO - ATV QUADS TRACK
9.4.1 ADJUSTING THE CHAIN TENSION
Adjust the chain tension as follows:
1) Loosen the screws holding the tensing roller shafts (as shown in the drawing). Half a
turn is enough.
2) Then, adjust the chain tension by tightening the side screws. To check whether the chain
is properly tensed: the nylon rollers should press tightly enough against the chain to be
difficult to turn by hand but still sufficiently loose to be able to turn despite the friction. Bear
in mind that when the top screws are tightened, the rollers will close and press even
more tightly against the chain. This may make the handlebar too hard to turn.
36