Configuring Maximum Multicast Groups That Can Pass Ports - H3C S3610 Series Operation Manual

Operation Manual – Multicast Protocol
H3C S3610&S5510 Series Ethernet Switches
II. Configuring a multicast group filter on a port or a group ports
Follow these steps to configuring a multicast group filter on a port or a group ports:
To do...
Enter system view
Enter
the
corre
spon
ding
view
Configure
multicast
filter

2.6.3 Configuring Maximum Multicast Groups that Can Pass Ports

By configuring the maximum number of multicast groups that can pass a port or a group
of ports, you can limit the number of number of multicast programs on-demand
available to users, thus to control the traffic on the port.
Follow these steps to configure the maximum number of multicast groups that can pass
the port(s):
Enter system view
Enter
the
corre
spon
ding
view
Configure
maximum number of
multicast groups that
can pass the port(s)
system-view
Enter
interface
Ethernet
interface-number
port view
Enter port
port-group { manual port-group-name
group
| aggregation agg-id }
view
a
igmp-snooping
group
acl-number [ vlan vlan-list ]
To do...
system-view
Enter
interface
Ethernet port
interface-number
view
port-group
Enter port
port-group-name
group view
agg-id }
the
igmp-snooping group-limit limit
[ vlan vlan-list ]
Chapter 2 IGMP Snooping Configuration
Use the command...
interface-type
group-policy
Use the command...
interface-type
{
| aggregation
2-17
Remarks
—
Use
command
Required
No filter configured
by default
Remarks
—
Use
command
manual
Optional
1,000 by default.
either
either