Table of Contents
Advertisement
6. Click on the Setup button.
You will see a window which
looks like the one on the right.
In the Setup dialog box, you can
set the Paper Size, the number of
Copies (from 1 to 99) and the
Orientation of the paper. A com-
plete listing of the types of paper
and other media types is in Chapter 2.
Note:
The Setup screen in GDI mode lets you select the following items:
• Paper size
• Number of printed sets (1 — 99)
• Portrait or landscape style printing
Caution: Remember that this printer can hold up to 100 sheets in the paper
tray. Overloading the paper tray will cause the paper to jam.
You must never select any port other than WTGDI in the Connect box
of the Printers menu. If you want to change the port from LPT1 to
LPT2 or LPT 3, use the Star WinType Print Manager to make these
changes.
7. Clicking on the Options button will call
up the Options dialog box, shown at right,
which is where you can make the follow-
ing selections.
•
Clicking on the Use WinType Print
Manager will cause the printer driver to
always display the WinType Print
Manager. The WinType Print Manager
is explained in Chapter 5.
•
If you have Use WinType Print Manager
selected, you can also click on Reverse
Printing Order which will print your
document from the highest page number
to the lowest page number.
•
If you have Use WinType Print Manager
selected, you can also select Manual
Duplexing.
Note:
This printer will print faster if the WinType Print Manager is turned OFF.
Note:
Printing Status Options are only available when the Use WinType
Print Manager is not selected in this dialog box. However, you can
enable and set up the Printing Status Options from within the
WinType Print Manager. See Chapter 5 for details.
27
Advertisement
Table of Contents
