Table of Contents
Advertisement
6. Adjust the paper guides to the width of
the stack.
Envelopes must be inserted into the upper
paper tray in the orientation as shown in
the illustration at the right.
7. Move the paper release lever to the
back of the printer.
Note:
Never add more media to a partially finished stack. Wait until the
stack in the upper paper tray has been finished before loading
another stack.
Caution: Only use envelopes recommended for laser printers to avoid paper
jams or quality problems.
Do not load more envelopes than the recommended amount because
this will cause paper jams.
16
YES
NO
Advertisement
Table of Contents
