Table of Contents
Advertisement
1
Installation
1.4
Items supplied with unit
Check the contents against the packing list to ensure that
nothing is missing.
Requirements to be met by the place of installation
NOTE
Observe all statutory building regulations
applying to the place of installation.
DANGER!
Inflammable materials or liquids must not be
stored or used near wall-mounted condensing
gas boilers. The site of installation must be
frost-protected.
1.5
Hanging the boiler
CAUTION
DO NOT remove the polystyrene foam bottom
slab protecting the connection nozzles.
During installation work, cover the wall-
mounted condensing gas boiler and the flue
gas adapter to prevent site dirt from entering,
e. g. using aluminium foil.
CAUTION
DO NOT remove the insulation located at the
top of the frame.
Attach the manifold assembly (accessory) to the wall
(fig. 5, item 1).
Attach the pipes.
Subject to modifications resulting from technical improvements!
10
Installation and maintenance instructions for wall-mounted condensing gas boiler 600 - 28C • 01/2004
fig. 4
Items supplied with unit
Key to fig. 4:
1: Wall-mounted condensing gas boiler
2: Wall bracket
3: Technical documents
4: Filling loop
5: Condensate drain
6: Plastic bag containing the following accessories:
2 x wall fixing screws
2 x wall plugs
2 x washers
Seals (1 x G½" - 1", 2 x ¾" - 22 mm, 2 x ½" - 15 mm)
Initial start-up sticker
Second identification plate
Safety valve nipple (from ¾" to ½")
fig. 5
Installation
Boulter Buderus Ltd. • http://www.boulter-boilers.com
2
1
3
4
6
5
2
1
Advertisement
Table of Contents
