Errors - Star Micronics TSP400Z Series User Manual

4) Replace the ROM cover. Then secure it with the screw. The settings take effect
when you turn on the printer.

6-5. Errors

The various types of errors can be identified by the buzzer's sound and the lit
LEDs or the test print result.
Buzzer: The circled numbers refer to the type of buzzer sound.
LED: The circle ( ) indicates that the LED is lit up.
a) Recoverable errors
The printer goes off line (ON LINE LED goes off) when these errors occur.
After the cause of the error is removed, operation of the printer should return after
the ON LINE switch is pressed.
Error
Head up error The head is up.
No paper error Paper is not installed.
b) Unrecoverable errors
The printer goes off line (ON LINE LED goes off) when these errors occur.
Operation of the printer cannot be returned after the cause of the error is removed.
Error
The paper size differs from
Label size error
the set size.
Command There is an error in the
error *1 command.
Cutting error The paper was not cut
properly.
Transmission There is an abnormality in
error *2 the received data.
*1 Only in page mode
*2 Only with the serial interface
If a framing error or a vertical parity error occurs in Line Mode, "?" is printed.
Cause Buzzer
Cause Buzzer
– 14 –
LED
ERROR HEAD UP NO PAPER
2
3
LED
ERROR HEAD UP NO PAPER
4
5
5
5