A-2. Paper Specifications - Star Micronics TSP400Z Series User Manual

A-2. Paper Specifications

Recommended paper-roll types:
Nippon Paper Industries
Oji paper Co.,Ltd.
Mitsubishi Paper Mills Limited P220AG (normal type paper)
Ricoh Co., Ltd.
*1 When using the AFP235 and 130LSB paper rolls, set the Print density on
maximum in the Print Density Adjustment as described in Section 6-3.
Many paper types are available. Please use paper that meets the following
criteria.
1. Paper type
2. Paper width
3. Paper thickness
4. Paper rolls
TF50KS-E (normal type paper)
TF62KS-E (normal type paper)
KF-730 (normal type paper)
*1
AF P235 ( high image stability paper)
*1
130 LSB ( medium image stability paper)
General high-sensitivity thermal paper
General high-sensitivity label paper
60 mm ~ 82 mm
-1
When using narrow paper, be sure that the
paper is at least wide enough to keep the platen
and head from touching. Never use paper that
allows the head to touch the platen.
If the paper width is 70 mm or less, do not run
the platen in reverse.
General thermal paper: 60 ~ 150 m
Label paper:
Internal diameter:
Outer diameter:
Rolls must have the thermal side facing in-
wards. Never use tape or other adhesive to
fasten the trailing end of the paper to the roller.
– 65 –
Max. 160 m
25.4 mm (1 inch)
115 mm