Star Micronics TSP400 Series Technical Manual page 11

Baud
2400BPS
4800BPS
9600BPS
19200BPS
Mode
DC1/DC3 invalid
DC1/DC3 effective
Addressable
To select a mode:
With an RS-232C interface, use DIP switches 1-7 to select the mode. With an RS-422A interface, use DIP switch
#2.
2 RS422A interface
This board has two DIP-switches: one 8-bit switch and one 4-bit switch.
DIP switch #1 (8 bits):
Identical to the DIP switch on the RS232C (see above). But note that bit 1-7 is meaningless.
DIP switch #2 (4 bits):
DC1,3 off
Address #1
#2
#3
#4
#5
#6
#7
#8
#9
#10
#11
#12
#13
#14
DC1,3 mode on
* DIP-SW #2 overrides the DIP-SW #1 DC1/3 setting (bit 1-7).
* DIP-SW #2 factory setting: All ON
3 Parallel (Centronics) interface
The parallel-interface board has no DIP switches.
1-1 1-2
OFF OFF
OFF ON
ON ON
ON OFF
Status of printer power
1-8 ON
Printer selected
Printer selected
Printer de-selected
SW2-1 SW2-2
ON ON
OFF ON
ON OFF
OFF OFF
ON ON
OFF ON
ON OFF
OFF OFF
ON ON
OFF ON
ON OFF
OFF OFF
ON ON
OFF ON
ON OFF
OFF OFF
– 7 –
SPECIFICATIONS AND OPERATION
1-8 OFF
Printer de-selected
Printer de-selected
Printer selected
SW3-3
ON
ON
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
OFF
OFF
OFF
OFF
SW2-4
ON
ON
ON
ON
ON
ON
ON
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF