General Specifications - Star Micronics TSP400 Series Technical Manual

1.

General Specifications

Printing method
Resolution
Printable width
Printing speeds
Printable characters
Character matrixes
Paper
Recommended brands
Width
Thickness
Roll diameters
Internal
Interface
Dimensions and weight
Power supply
Ambient conditions
Autocutter
Line thermal direct
8 dots/mm (H)
75 mm in Line Mode; 80 mm in Page Mode
50 mm/sec and 25 mm/sec
1 Page mode: ANK, International
2 Line mode: ANK, International, Special, Block graphic, IBM
special, IBM block graphic, Kanji
NOTE: ANK is comprised of ASCII characters and katakana
1 Page mode
Small
Standard
Wide
OCR-B
2 Line mode
Kanji
IBM block graphic
All others
TF50KS-E, TF62KS-E (Nippon Paper Industries)
KP50-HEAEX (New Oji Paper Co., Ltd.)
82 mm (3.25 inches)
60 to 150 m
External 115 mm max.
25.4 mm (1 inch)
RS232C, RS422A, or Parallel
Width
Depth
Height
Weight
120VAC, 220VAC, 240VAC
Operating
Nonoperating
Lifetime
Minimum cut length
3.4kg
(TSP412)
Fig. 1-1 External Dimensions
– 3 –
SPECIFICATIONS AND OPERATION
8 dots/mm (V)
8 16
16 24
24 32
16 24
24 24 (12 24)
12 24 or 12 32
12 24
178 mm (TSP412D) 178 mm (TSP442D)
226 mm (TSP412D) 244 mm (TSP442D)
256 mm (TSP412D) 256 mm (TSP442D)
3.4 kg (TSP412D) 3.7 kg (TSP442D)
5˚C to 40˚C; 25%RH to 85%RH
-20˚C to 60˚C; 10%RH to 90%RH
300,000 cuts (if paper debris is cleared)
25.4 mm (1 inch)
3.7kg
(TSP442)