Dip-Switch Settings - Star Micronics TSP400 Series Technical Manual
Star micronics technical manualthermal printer tsp400
Hide thumbs
Also See for TSP400 Series:
- Programmer's manual (136 pages) ,
- User manual (57 pages) ,
- Installation manual (39 pages)
Table of Contents
Advertisement
3.
DIP-Switch Settings
DIP switches are located on the interface PCB. The number of switches depends on the interface type.
(1)
Setting the DIP Switches
1 Remove the screw holding the ROM cover in place. (The screw is located at the base of the paper-roll holder.)
2 Remove the ROM cover, exposing the main and interface PCBs.
SPECIFICATIONS AND OPERATION
Fig. 1-3 DIP-Switch Settings
– 5 –
Advertisement
Chapters
Table of Contents
