7.3.10 System - Aastra DT390 User Manual

User Manual
Cordless Telephone DT390

7.3.10 System

Only available systems are displayed. It is possible to switch between the systems if they
are configured in the PDM, see Installation and Operational Manual, Portable Device
Manager (PDM), Windows version, TD 92325GB and Installation and Operation Manual
(CPDM), System version, TD 92473GB.
Change System
Select "Automatic" or a specific system. If the phone is set to "Automatic" it selects a
system according the priority list, see
Subscribe System
The cordless telephone can subscribe up to eight different systems. To subscribe a new
system the "Park:" (Portable Access Right Key) and "Ac:" (Authentication code) related to
the system you are going to log on to are needed. Contact your system administrator for
more information.
The IPEI code is a unique code which has been assigned to the cordless telephone, see also
9.1 Look up the IPEI Code
1 Enter System name. Press "next".
2 Enter PARK code.
3 Enter AC code. Press "Next".
An information text "Protection on?" is displayed.
4 Select "Yes"/"No", if the new system is to be protected from desubscription or not.
5 Press "OK". A searching mode starts.
Unsubscribe System
1 Select "Unsubscribe" to delete a System subscription.
2 Select "Delete".
Note: It is not possible to delete a protected subscription.
Rename System
It is possible to change the name of the system in the telephone.
1 Select "Rename System".
2 Select system to rename.
3 Enter new name.
4 Select "Save".
2008-06-12/ Ver. PA11
PRELIMINARY
Priority
on page 34.
on page 33.
TD 92476GB
32