Aastra DT390 User Manual page 13

User Manual
Cordless Telephone DT390
The display normally shows date and time, the Owner ID and telephone number. The
Owner ID can manually be set by the user.
Menu
Figure 4. Example of a display configuration in standby mode.
The top row (Status bar) is used for icons which give the user information for signal
strength, missed call, time and battery status. This row is always visible in all screens.
The next row (Header bar) displays the current date, headset connection, phone lock etc.
The next rows (Active area) are used for information such as the name of the system to
which the cordless telephone is connected to. A user identity, Owner ID (if supported by
the network) can also be displayed if it has been configured in the Settings menu. This is
also a the area for pop up text for example, missed calls or to confirm an action.
The bottom row (Soft key bar) is used for Soft keys. The functions for the Soft keys cannot
be changed.
2008-06-12/ Ver. PA11
PRELIMINARY
Status bar
11:00
Header bar
05/12/2007
System A
Active area
709040
Soft key bar
TD 92476GB
9