Star Micronics SCP700 Series User Manual page 16

12
Press the green paper release lever down. This creates a space between the
rubber rollers that feed the paper through the receipt printer mechanism.
Insert the leading edge of the paper into the paper inlet slot on the bottom of
the receipt printer mechanism. Keep feeding the paper into the inlet until
the leading edges comes out the other side of the receipt printer mechanism.
After making sure that the paper is straight and centered, pull up the green
paper release lever to lock the paper in place.
Pull up on the excess paper to tear it off on the metal straight edge.
Gently lower the receipt printer mechanism back to its original position and
close the printer cover.