Install Powervault On Core Appliance Used As A Hybrid; Prerequisites - Dell PowerVault MD1400 Setup Manual

Install PowerVault on Core Appliance Used as a
Hybrid
This topic describes how to install a PowerVault on RSA Series 5 (R630) and Series 6 (R640)
used as a hybrid. In this context , a hybrid refers to:
Log Hybrid - runs the Log Collector, Log Decoder, and Concentrator services on one host
l
(Series 5 - R630 or Series 6 - 640).
Network Hybrid - runs the Concentrator and Decoder services on one host (R630 or R640).
l
Note: You can install PowerVault with or without Encryption on an RSA Series 5 (R630) and
Series 6 (R640) used as a hybrid.

Prerequisites

Make sure that you have the following required software.
rsa-sa-tools -
rsa-sa-tools-11.x.x.x-<build-information>.el7.noarch.rpm
or later, which contains the script you need to configure the storage. For RSA NetWitness
Platform 11.3 and later, use the version shipped with the product.
To verify the rsa-sa-tools version, log in as root on the physical hosts and run the following
command:
rpm -qa | grep sa-tools
Results example:
rsa-sa-tools-11.x.x.x-<build-information>.el7.noarch.rpm
This RPM is updated quarterly. Contact RSA Customer Support to obtain the most recent
version.
Caution: If you are adding a previously used PowerVault and would like to preserve the data,
DO NOT follow the instructions in this guide. Contact RSA Customer Support. Running the
script on a previously used PowerVault could erase any existing data.

Install PowerVault on Core Appliance Used as a Hybrid

PowerVault (Dell MD1400) Setup Guide
56