Dell PowerVault MD1400 Setup Manual page 35

Caution: After configuring the PowerVault the first time for a service, there is a possibility of
background RAID initialization running for at least 24 hours. During this initialization, disk
I/O performance may be affected.
Note: You must use a PowerVault with Self Encrypted Drives (SED).
1. Log in as root and verify that the rsa-sa-tools package is installed by running the following
command:
rpm -qa | grep rsa sa-tools
Results example:
rsa-sa-tools-11.2.0.0-1808301802.5.941817f.noarch
If the package is not installed, contact RSA Customer Support to obtain a copy of the RPM
and install it.
2. Change the directory to the rsa-sa-tools RPM base directory:
cd /opt/rsa/saTools
3. Execute the following command:
./nwraidutil.pl
4. Important: Check the results and resolve ALL conditions before running the script.
The following example illustrates how the results from the
should appear if there are no conditions.
35
PowerVault (Dell MD1400) Setup Guide
Install PowerVault with Encryption on a Series 6 R640 Host
command
./nwraidutil.pl