Dell PowerVault MD1400 Setup Manual page 65

-d DRVS, --drives=DRVS
Number of drives for the concentrator service on
hybrid or for the meta on logdecoder. (3-11) [3]
-r REST, --rest=REST
-u USER, --user=USER
-w PSWD, --password=PSWD
Password for user or enter 'ask' to be prompted.
-c CRYP, --ssl=CRYP
[root@P<hostname> saTools]#
This script discovers all available PowerVaults; creates all the necessary virtual drives,
logical volumes, and the directory structure; and writes the debug messages to
/opt/rsa/saTools/arrayCfg.log. On Log Decoder and (Network) Decoder physical hosts, this
script adds the database types of packetdb, metadb, and sessiondb. On Concentrator physical
hosts, this script adds the data.Nwbase types of metadb and sessiondb.
The following is an example of the output.
Checksum type 'md5' disabled
Creating new volume group decodersmall on /dev/sdc
Volume group "decodersmall" successfully created
Creating new volume group decoder on /dev/sdd
Volume group "decoder" successfully created
Additional enclosures available! Rerunning to add additional storage
Creating new volume group decodersmall0 on /dev/sde
Volume group "decodersmall0" successfully created
Creating new volume group decoder0 on /dev/sdf
Volume group "decoder0" successfully created
Success!: Added all available storage found. The decoder service will need to
be restarted for the extended storage to be available
6. Verify the results:
a. Ensure that the script did not produce any errors by viewing the
/opt/rsa/saTools/arrayCfg.log file:
more /opt/rsa/saTools/arrayCfg.log
b. Run the following command to verify the new sizes of the databases:
df -hP | grep 'decoder\|concentrator\|archiver\|Filesystem'
The following is an example of the results that are displayed on a Decoder:
65
PowerVault (Dell MD1400) Setup Guide
Configured REST port if different from default
The user name for logging into the service. [admin]
[netwitness]
Is SSL enabled? (0|1) [0]
Install PowerVault on Core Appliance Used as a Hybrid