Table of Contents
Advertisement
I
LOADING AND PARKING FANFOLD FORMS
Fanfold forms have holes along the sides and perforationsbetween the
sheets.They are also called sprocketforms, punchedforms, or just plain
"computerpaper".This printeracceptsformsup to 10"wide.This section
will take you throughthe proceduresfor loading,parking and unparking
fanfoldforms.
NOTE: To get good line-feeding,put l-inch space (non-printingarea)
arounda perforation.
Loading the paper from the rear of the printer
Youcanloadthefanfoldpapereitherfromtherearor fromthebottomof the
printer.If you are goingto loadthepaperfromthe bottom,refer to the next
section.
1.
2.
3.
4.
5.
Placea stackof fanfoldpaperbehindandatleastonepage-lengthbelow
the printer.
Turn the printer'spower OFF.
Pushthe releaseleverforward.Thishasthe effectof releasingthe paper
from the platen roller, and engagingthe tractor feed.
Removethe paper guideand put it asidefor the moment.
Removethe rear coverusingthe two pits on eitherside,andpushback-
wards as in Figure 1-12.
Figure 1-12. Removing the rear cover
13
Advertisement
Table of Contents
