Table of Contents
Advertisement
Selecting the print color
Normally,the color printer prints with black even if the color ribbon is
installed.
Withoutthe aid of software,you can changethe printingcolor as follows:
1.
2.
3.
4.
PresstheC
ON LINE
)
buttonto set the printeroff-line.
Press theCFGN71 buttonand hold it down.
Whileholdingthe(-)
button,press the ( S':m+$c
' ) button.
Each time you press the ( =wdkr' ) button,one of the indicatorsof
FONT or PITCH
will blink to showthe currentcolor as shownbelow.
Color
Indicator
Color
Indicator
Black
HS-DRAFT
Yellow
10CPI
Magenta
ROMAN
Orange
12CPI
cyan
COURIER
Green
15CPI
Violet
SCRIPT
Releaseboth buttonsafter you set the desiredprintingcolor.
If you want to save the selectedcolor for later use, store it using the
Macro Definition.
NOTE:This functions validonlywhenthecolorribbonis installedintothe
color printer.
Store Macro Definition
You camstore the current settings to the printer for later use with the
followingprocedure:
1.
2.
3.
4.
Press the( ON
LINE
)
buttonto set the printeroff-line.
Press the (~)
buttonand hold it down.
While holdingthe(~>button
down,press the (TiTCll> button and
hold them down until you hear two beep tones.
Releaseboth buttonsat the sametime after the two beeptones to stem
the currentsetting.
If you releasethesebuttonsafterthreebeep tones,the macrois cleared.
NOTE: You can storethe followingsettingswith this procedure.
CurrentFont and Pitch
Currentauto-loadingamountfor cut sheet
Currentauto-loadingamountfor continuouspaper
" Currentauto-loadingamountin ASF mode
35
Advertisement
Table of Contents
