Table of Contents
Advertisement
Loading the paper from the bottom of the printer
You caq load the fanfold paper from the bottom of the printer with the
followingprocedure.
1. Removethe top coverand the rollerunit.
2. Openthe rear coverusingthe two pits at the side,and push backwards.
3. Gripthe positioningleverson both sideof the tractorunit, and pull the
uni; upwardsas shownin Figure 1-16.
Figure 1-16. Pull up the tractor unit for bottom feeding
4.
5.
6.
Place a stack of fanfoldpaperbelowthe printer.
With the tractor coversopen, mount the paper from the bottomof the
printer,by aligningholes with the pins on the tractorunit.
Adjustthespacingofthetractorunitsby slidingthemalongthebar,using
the clamp lever at the back of each unit to release and lock them in
position.Whenthe leveris up, theunitis released,and whenit is down,
the unit is locked.
16
Advertisement
Table of Contents
