Loading Multi-Part Forms - Star Micronics LC24-200 Colour User Manual

I
LOADING MULTI-PART FORMS
Youcan print on continuousmulti-partformswith the built-intractorunit.
Youcanusemulti-partformsthathaveupto fivepartsincludingtheoriginal
when the Multi-partmode is selectedwith the EDS setting. (For details,
pleaserefer to Chapter3.)
Itis recommended touseformsjointedbydottedorpastingunderthenormal
office condition.
Multi-partformsshouldbepressuresensitive,and shouldnotbe usedin the
frictionfeed. (Bottomfeed with the pull-tractoris recommended.)
NOTE: Whenprintingcontinuousmulti-partforms,care shouldbe taken,
as the edges of the papermightbe damaged.
The tolerance between the dotted or pasted position and other
positionsmust be less than 0.05 mm.
19