Power button board
Table 6-10
Power button board description and part number
Description
Power button board
Before removing the power button board, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the following components:
a.
Display panel (see
b.
Battery (see
c.
Left speaker (see
Remove the power button board:
1.
Disconnect the cable from the ZIF connector on the power button board (1).
2.
Remove the Phillips M1.6 × 1.6 screw from the board (2).
3.
Remove the Phillips M1.6 × 2.4 screw from the bracket (3).
4.
Lift the assembly out of the computer (4).
Reverse this procedure to replace the power button board.
58
Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Display panel on page
Battery on page
42)
Speakers with antennas on page
38)
52)
Spare part number
L67420-001
35).