Clearances To Combustibles - Quadra-Fire 3100 MILLENNIUM Installation Manual

31M-ACC-C
C. Clearances to Combustibles
MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS in inches (Millimeters)
SINGLE WALL PIPE
DOUBLE WALL PIPE
INSTALLATION: 90 DEGREE ELBOW OFF TOP OF APPLIANCE THROUGH BACKWALL
SINGLE WALL PIPE
DOUBLE WALL PIPE
DOUBLE WALL PIPE
For alcove only: Six inch diameter listed Double wall air insulated connector pipe with UL103 HT listed factory built Class A
chimney or masonry chimney. Maximum depth of Alcove shall be no more than 48 inches (1219mm) and the referenced
alcove clearances. Canada must comply with CAN/ULC-S269 M87 for the 650° factory built chimney.
Table 10.1
ALCOVE TOP VIEW
CORNER INSTALLATION
E
F
WARNING
Fire Risk.
• Comply with all minimum clearances to
combustibles as specified.
• Failure to comply may cause house fire.
10
Note: A, C, and F Dimensions are to the center of the flue collar
INSTALLATION: FULL VERTICAL
A B
18-1/4 (464) 11-3/4 (298)
13-1/2 (343) 6-1/2 (165)
15 (381) 8-1/2 (216)
11 (279) 4-1/2 (114)
INSTALLATION: ALCOVE
14-3/4 (375) 8-1/4 (210)
ALCOVE SIDE VIEW
C
BACKWALL / SIDEWALL
E
F
3100 Millennium
C D
28-1/2 (724) 16 (406)
25 (635) 13 (330) 6-1/2 (165)
25 (635) 13 (330)
20-1/2 (521) 8-1/2 (216) 6-1/2 (165)
26-1/2 (673) 14-1/2 (368)
A
G
A B
C
D
NOTE: Service Space
In order to replace the tube channel assembly a
clearance of 19 inches (483mm) is required on the right
side of appliance in order to remove the tubes with the
appliance in place.
If space is not available, the appliance will have to be
disconnected from the chimney to proceed with the
tube replacement.
7033-350E
E F
8 (203) 20 (508) 48 (1220)
18-1/2 (470) 48 (1220)
8 (203) 20 (508) 48 (1220)
18-1/2 (470) 48 (1220)
N/A N/A 48 (1220)
90° OFF TOP
UP & OUT CEILING
CLEARANCE
NOTE: Clearances may only
be reduced by means
approved by the regulatory
authority having jurisdiction
G H
12 (305)
9 (229)
12 (305)
9 (229)
N/A
H
G
September 9, 2019