Important Safety Notice - FujiFilm instax mini Link User Manual

Problem Possible causes and solutions
The print is • Do not shake, bend, fold or hold the print
uneven. immediately after it is printed.
• Do not obstruct the film ejection slot.
I cannot reprint The last stored image that has been printed
images. is deleted when the printer is turned off.
I cannot change Setting [Camera operation settings] on the
the app mode mini Link app to [ON] enables the
even when smartphone app linked function to work.
operating the Check the orientation of the printer.
mini Link app.
The function Confirm that [Camera operation settings] on
that is used by the mini Link app is set to [ON].
tilting the
printer does not
work.
12

IMPORTANT SAFETY NOTICE

This product has been designed with safety in mind and to also
provide safe service when handled correctly in accordance with
the User's Guide and the instructions provided. It is important that
both the product and the "instax mini" film are handled properly
and used only to print pictures as instructed in the User's Guide
and in the "instax mini" film instructions. For your ease and safety,
please follow what is written in the User's Guide. It is also a good
idea to keep the User's Guide in a safe, easy to find place where
you can refer to it if needed.
This symbol indicates danger, which could result in injury or death.
Please follow these instructions.
If any of the following instances occur, immediately unplug the
USB cable, turn the printer off and cease use.
• The printer becomes hot, emits smoke, emits a burnt smell or is
functioning abnormally.
• The printer is dropped into water or any foreign objects enter
the printer.
This device contains a built-in battery. Do not subject to heat,
throw it into an open fire, drop or subject to impact. Doing so
could cause the printer to explode.
Never attempt to take this product apart. You may be injured.
If the printer is not functioning correctly, to avoid injury do not
attempt to repair yourself. You may be injured.
If this product is dropped or damaged so that the internals are
visible, do not touch it. Contact your FUJIFILM dealer.
Do not touch any parts within the inside of the back cover. This
may cause injury.
Never get this product wet or handle it with wet hands. Doing so
may result in an electric shock.
Promptly unplug the USB cable once battery is fully charged.
Keep out of the reach of small children. This product could cause
injury in the hands of a child.
Do not cover or wrap the printer or the AC power adapter in a
cloth or blanket. This can cause heat to build up and distort the
casing or cause a fire.
The "CE" mark certifies that this product satisfies the
requirements of the EU (European Union) regarding
safety, public health, environment and consumer
protection. ("CE" is the abbreviation of Conformité
Européenne.)
Hereby, FUJIFILM declares that the radio equipment type
"instax mini Link1" is in compliance with Directive 2014/53/EU.
For more information, access the website below.
https://www.fujifilm.com/products/instant_photo/printers/
instax_mini_link/
WARNING
WARNING
WARNING