Loading/Unloading the instax mini Film Pack
Caution
Do not open the film door until you have used up the film;
otherwise, the rest of the film will become exposed and turn
white� The film can no longer be used�
• When you load the film pack, never press the two rectangular
holes on the back of the film pack.
• Never use a film pack beyond its shelf life; otherwise, it may
damage the printer.
Use FUJIFILM instax mini Instant Film only. The instax SQUARE
film or instax WIDE film cannot be used.
Notes on the film pack
• Each FUJIFILM instax mini film pack contains one black film
protective cover and 10 film sheets.
• Do not remove the film pack from its inner foil packaging
until you are ready to load the film into the printer.
• The film cover is ejected automatically when the film door is
closed.
For details, refer to the instructions and warnings on FUJIFILM
instax mini Instant Film.
Loading the Film Pack
1
Slide and hold the film door lock, then open the film
door.
1
2
Insert film pack by aligning the yellow marks on the
film pack and body of the printer�
2
1
Note
Be sure to align the yellow marks on the printer and on the
film pack.
2
3
Close the film door�
4
The black film protective cover will automatically be
ejected� This can be removed and disposed of�
.
Unloading a Used Film Pack
1
Slide and hold the film door lock, then open the film
door�
1
2
Grasp the rectangular holes on the film pack and
remove the empty film cartridge�
2
1
WW_EN
2
5