Arris SURFboard SBV3202 User Manual page 16

2. Hold the battery pack so that the guides on the battery align with the slots on the
SBV3202 and slide the battery into the bay.
1 - Battery Slots
2 - Battery Guides
Note: Batteries will not insert completely into the SBV3202 if not oriented correctly. The
battery should slide into the bay without significant force. Line up the guides on the
battery with the slots in the battery bay.
3. Push the battery pack into the bay until it seats into place.
If you are taking the battery out of the SBV302, position your finger in the battery
opening area and use leverage to dislodge the battery while pulling it straight back.
Note: The SBV3202 will not begin operating until you apply AC power.
4. Replace the door. To do so, place the hinge tabs of the battery door into the receiver
slots inside the SBV3202 battery compartment on the -opposite end of the battery
opening. Rotate the door toward the unit until the latch snaps back into place.
1 - Battery Compartment
2 - Hinge Tabs
3 - Receiver Slots
PN 365-095-32810 x.2
© 2018 ARRIS Enterprises, LLC. All rights reserved.
Chapter 4: Battery installation and removal
SBV3202 DOCSIS® 3.0 Telephony Modem for Xfinity® Customers User Guide
16