Polycom VSX Series Getting Started Manual page 26

G S G
ETTING TARTED UIDE FOR THE
22
VSX S
ERIES
3. Specify the following information:
In this field...
Name
Number
Call Quality
IP Number
Extension
Call Quality
Phone Number
Mobile Number
Email
Category
4. Select Save to save the entry.
To add a multiple-site entry to the directory:
1. Press Directory on the remote control.
2. Select New and specify that this is an entry for multiple sites.
3. Add up to three numbers to this multiple-site entry either by:
Selecting entries from the directory, or
Adding entries manually.
4. Specify a speed for the call. Note that each call in the multipoint
conference is placed at the same speed.
5. Select Save to save the entry.
6. Enter a name for this entry as you want it to appear in the directory
list.
Enter this information...
Name that will appear in the directory list and
on incoming call messages.
ISDN number to use for calling the site.
Call speed to use for ISDN calls to the site.
IP address for calls to the site.
The system's gateway extension.
Call speed to use for IP calls to the site.
Optional contact information for other
resources in the conference room.
Designation to help you quickly find the
number in the directory.
.
WWW POLYCOM
. /
COM VIDEODOCUMENTATION