1. Manuals
  2. Brands
  3. Backyard Play Systems Manuals
  4. Play Sets & Playground Equipment
  5. 3313
  6. Manual

Backyard Play Systems 3313 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2692
- NOTICE -
This playset product is not intended for public use. It is intended for
residential application and is not warranted for public or commercial use.
STOP!
STOP!
Call Us First!
DO NOT RETURN TO STORE.
For immediate help with assembly or product information
call our toll-free number:
1-800-437-0784
April through October M - F 8:00 AM to 6:00 PM EST
Saturday 8:30 AM to 4:30 PM EST
November through March M - F 8:00 AM to 5:00 PM EST
or email:
customerservice@backyard-play.com
Our staff is ready to provide assistance.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3313 and is the answer not in the manual?

Questions and answers

Related Manuals for Backyard Play Systems 3313

Summary of Contents for Backyard Play Systems 3313

  • Page 1 2692 - NOTICE - This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! STOP! Call Us First! DO NOT RETURN TO STORE. For immediate help with assembly or product information call our toll-free number: 1-800-437-0784 April through October M - F 8:00 AM to 6:00 PM EST...
  • Page 3 2692 11/29/2012 Customer Service Backyard Play Systems Model 3313, 1-866-890-2211 Playset 3323 1000 Ternes Drive Monroe, MI 48162 Recommended for Ages 3 to 11 - BEFORE YOU BEGIN - - BEFORE YOU BEGIN - Tools Required Adult Assistance required First...
  • Page 4 ASSEMBLY SAFETY and HELPFUL HINTS STOP!!! Check all parts and hardware before beginning. If any parts are missing or damaged please circle and call the phone number listed. DO NOT CONTACT THE STORE OR RETURN YOUR PLAYSET ! KEEP THIS INSTALLATION MANUAL FOR FUTURE CARE AND MAINTENANCE REFERENCE.

  • Page 5: Safety Warnings

    SAFETY WARNINGS Please read carefully. Observing the following statements and warnings reduces the likelihood of serious or fatal injury. This playset has been designed for use by a maximum of eight occupants at one time having a combined weight of 1,200 pounds. (This weight does not include occupants in the sandbox area.) This playset is recommended for children (3) through (11) years of age.

  • Page 6: Maintenance

    MAINTENANCE Periodic maintenance is required to ensure safe enjoyment of your playset and optional accessories. Observing the following procedures reduces the likelihood of serious or fatal injury. Activity on your playset and optional accessories may loosen fasteners. Check all lock nuts, hex and lag bolts, quick clips, spring clips, acorn nuts, wood screws, and swing hangers for tightness and tighten as required.
  • Page 7 PLAYGROUND SURFACING MATERIALS SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK Select Protective Surfacing and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard surface.
  • Page 8 PLAYSET ORIENTATION *Hint* Throughout this manual references made to the Left Side, the Right Side, the Front Side and the Back Side of the playset serve as a consistent reminder to help with assembly. BACK SIDE RIGHT SIDE FRONT SIDE LEFT SIDE...
  • Page 9 IMPORTANT! Use these Assembly Procedure Hints throughout the installation process. 1. All Lag Bolts must have pre-drilled holes. Use a 1/4” drill bit for all 3/8” Lag Bolts. Use a 3/16” drill bit for all 5/16” Lag Bolts. Pre-drilling pilot holes will help prevent Screws and Lag Bolts from breaking and wood from splitting during assembly.
  • Page 10 W O O D P A R T S L I S T 1 x 3-1/2 x 45-1/8" 1 x 3-1/2 x 45-1/8" 1-1/2 x 3-1/2 x 18" 1-3/8 x 3-3/8 x 51" 2501-CC 2526-CC 1020-CC 1-1/2 x 3-1/2 x 47-1/8" 3/4 x 2-1/2 x 45-1/8"...
  • Page 11 Angle Bracket Plate Swing Beam 90 Plate Swing Beam Angled Plate Left Swing Beam Angled Plate Right 2485 L-Bracket 2412 2449 2448 2447 Swing Beam Flat Plate Stake Slide Swing Hanger 2411 2194 2601-A 2099 Trapeze Swing Climbing Rocks 2434 2435 2451 Plaque...
  • Page 12 3/8” LOCK WASHER 3/8” LOCK NUT 3/8” T - NUT 3/8” 3/8” TRUSS HEAD 1/4” x 1” FENDER WASHER 3/8” FLAT WASHER SCREW 1” 3/4” 3/8” 1/4” LOCK 1/4” FLAT 2-1/2” 3/16” x 1” FENDER WASHER WASHER WASHER PAN HEAD SCREW 1”...
  • Page 13 3/8” HEX HEAD BOLTS 1-3/4" 2" 2-1/4" 3-3/4" 3/8" 3/8" 5" 3/8" 1-1/4" 3/8" 3/8" 3/8 " LAG BOLT 3/8" 3/8" LAG BOLT WOODSCREWS x100 1-1/4" 4" 2" 2-1/2" 3" 3"...
  • Page 14 A C T U A L S I Z E S H O W N 3-3/4" 4-1/2" 6" 6-1/2" 8-1/2" 3" 3/8" 3/8" 3/8" 3/8" 3/8" BUTTON HD. SCREW BUTTON HD. SCREW 3/8" TORQUE WASHER 1-1/2” 1-1/4” 3/8" 3/8" 5/16” 5/16”...

  • Page 15: Safety Area

    PLAYSET SET-UP SAFETY AREA BACK SIDE 6' SAFETY AREA 18'-2" SWING SLIDE 8'-4" HEIGHT ROCK 10'-2" WALL 6' SAFETY AREA FRONT SIDE PLAYSET SET-UP WITH MONKEY BARS SAFETY AREA BACK SIDE 6' SAFETY AREA MONKEY BARS 18'-2" SWING 14'-2" SLIDE HEIGHT 10'-2"...

  • Page 16: Corner Posts

    FORT CORNER POSTS 3-3/4" Hex Bolt 2543-CC Lock Washer Flat Washer 3" Wood Screw Note 2 hole location. Flush Hole for Climbing Rope Flush 2543-CC 47" 3 x 3 x 95" 12-5/8" 2526-CC 1 x 4 x 45-1/8" 4" 2501-CC Flush 90°...
  • Page 17 FORT CORNER POSTS Large holes toward top Note 2 hole location. 1 x 3-1/2 x 45-1/8" Ensure all bracing is 2501-CC square before installing wood screws. T-Nut Flat Washer Lock Washer 3-3/4" Hex Bolt 1 x 5-1/2 x 45-1/8" Flush 2507-CC Flat Washer Lock Nut...
  • Page 18 BASE FORT FLIP ASSEMBLY OVER TO INSTALL BOTTOM BRACE. 3-3/4" Hex Bolt Lock Washer Flat Washer 3" Wood Screw 1 x 5-1/2 x 45-1/8” 90° 2507-ST Flush Align braces with pre-drilled holes. Ensure all bracing is square before Flush installing wood screws. FORT CONNECT FRAME SECTIONS ENSURE THESE...
  • Page 19 FORT CONNECT FRAME SECTIONS 3" Wood Screws Ensure 47" measurement from bottom of base to top of boards. 47" 47" Reinforce bracing with 3" wood screws at all pre-drilled holes. FORT DECK CLEAT 3/4 x 2-1/2 x 45-1/8" 2516-CC Flush 2-1/2"...
  • Page 20 FORT DECK PLANKS Flush with post. 3/4 x 5-1/2 x 44-7/8" 2509-CC 2-1/2" Wood Screws evenly spaced 1-5/8" Wood Screws Flush FORT DECK PLANKS 3/4 x 4 x 38-7/8" 2510-CC 2-1/2" Wood Screws Flush along outer edge. 1-5/8" Wood Screws...
  • Page 21 FORT DECK SUPPORT 1020-CC Flush with outside. 2" Wood Screws Flush Flush Flush Flush 1020-CC 1-1/2 x 3-1/2 x 18" 3" Wood Screws Angle 3" wood screws. Angle 3" wood screws. FORT DECK SUPPORT 2" Wood Screws 1-1/2 x 3-1/2 x 18" 1020-CC 2"...

  • Page 22: Front Side

    FORT DECK RAILS Mark and drill 1/4” x 2” DEEP pre-drill before installing lag bolts. 2501-CC 3" Lag Bolt 1 x 3-1/2 x 45-1/8" Lock Washer 2501-CC Flat Washer Flush at all corners. on lower brace. 3" Wood Screws RIGHT SIDE FRONT SIDE Flush at all corners.
  • Page 23 FORT ROOF FRAME 3-3/4" Hex Bolt 1 x 3-1/2 x 63-7/8" Lock Washer 2500-CC Flat Washer T-Nut FORT ROOF FRAME Pre-drill 1/8" pilot holes. Install one 3" wood screw to secure 2504-CC’s. 1 x 3-1/2 x 40-1/2" Flush at Peak 2504-CC 2"...
  • Page 24 STEP LADDER ASSEMBLE 1-3/8 x 3-3/8 x 51" 2-1/2" Wood Screws 2522-CC 1-3/8 x 3-3/8 x 51" 2521-CC Flush to front face. Back side 2524-CC of ladder 1 x 3-1/2 x 15-3/8" ROCK WALL ASSEMBLE Align 2520-CC parallel with ladder and maintain dimensions as shown. Position plank 2519-CC as shown and attach to rails with screws.
  • Page 25 ROCK WALL ASSEMBLE Place planks onto rails as shown, flush to each other. With all planks flush and snug, secure plank with hole using screws. Maintain dimension shown. 3/4 x 3-1/2 x 23-3/4" 2527-CC 23-3/4" All flush HOLE 3/4 x 5-1/2 x 23-3/4" 2519-CC 2-1/2"...
  • Page 26 ROCK WALL ASSEMBLE Pre-drill 5/16" pilot holes. 2451 x1 BAG 1/4" x 1-1/2" Hex Bolts 1/4" Lock Washers 1/4" Flat Washers T-Nuts Do NOT attach top board at this time. ROCK WALL ASSEMBLE 5/16" T-Nut 5/16 x 1-1/2" Button Head Screw L-Bracket 5/16"...
  • Page 27 ROCK WALL INSTALL Flush Align ladder with inside of post and top of cross brace and mark holes. ROCK WALL INSTALL FRONT SIDE Rock Wall Pre-drill two 1/4" pilot holes at marked locations. Re-drill holes from opposite side using 3/8" bit.
  • Page 28 ROCK WALL INSTALL 5/16" T-Nut FRONT SIDE Rock Wall INSTALL ROCK WALL Flush with 1 x 3-1/2 x 17" angle. 2222-CC Flush with angle. 2-1/2" Wood screws...
  • Page 29 ROCK WALL INSTALL 5/16" Flat Washer Secure middle brace with (2) 5/16" Lock Washer 2-1/2" Wood Screws from behind. 5/16" x 1-1/4" Button Head Screw BEGIN HERE 2-1/2" Pan Head screw Flat Washer Flush Flush BEGIN HERE 2-1/2" Pan Flat Washer Head screw 2514-CC 2"...
  • Page 30 SWING BEAM SWING HANGERS - INSTALL Swing Beam Flat Washer Swing Hanger Bolt Swing Hanger Flat Washer IMPORTANT! Final position of each Spring Clip is 2194 perpendicular to swing beam. Swing Hanger You may need to tap with hammer to get though holes. Spring Clip SWING BEAM SWING HANGERS...
  • Page 31 UPRIGHT INSTALL Flat Washer Lock Washer T-Nut 1-3/4" Hex Bolt 2505-CC 1 x 3-1/2 x 47" 2539-CC Center 2539-CC. Mark and Pre drill 7/16" through holes for hex bolt. A - FRAME ASSEMBLE T-Nut x2 2525-W 3 x 3 x 95" Rotate 2525-W 180 after installing T-Nuts.
  • Page 32 A - FRAME ASSEMBLE 3-3/4" Hex Bolt Lock Washer Flat Washer Pre-installed T-Nuts 2506-CC are underneath. 1 x 3-1/2 x 68-1/2" SWING BEAM FLAT PLATE 3" Carriage Bolt 2411 Flat Washer Lock Nut...
  • Page 33 A - FRAME PLATE 2499 3-3/4" Carriage Bolt Lock Nut Flat Washer 2525-W SWING BEAM ANGLED PLATES 3-3/8 x 5-3/8 x 95” DO NOT FULLY TIGHTEN 2502-CC CARRIAGE BOLTS AT THIS TIME Flat Washer Lock Nut 2448 4-1/2" Carriage Bolt NOTE: You may need to tap bolts with hammer to get though holes.
  • Page 34 SWING BEAM ASSEMBLE Position swing beam assembly resting upon A-frame. SWING BEAM ASSEMBLE Align holes and insert carriage bolt. Repeat where arrows are shown. NOTE: You may need to tap bolts with hammer to get though holes. Clean all debris from bolt threads before installing lock nuts 3-3/4"...
  • Page 35 SWING BEAM ASSEMBLE 6-1/2" Carriage Bolt Torque Washer You may need to tap with Flat Washer hammer to get though holes. Lock Nut SWING BEAM INSTALL Position swing beam assembly resting 8-1/2" Carriage Bolt upon plate and align with holes. 6-1/2"...
  • Page 36 SWING BEAM INSTALL 1. Pre-drill using 3/16" bit. 2. Re-drill from opposite side using 7/16" bit. SWING BEAM INSTALL Flat Washer T-Nut Lock Washer 1-1/4" Hex Bolt...
  • Page 37 SWING BEAM ASSEMBLE 2-1/2" Pan Head Screw 1/4" Lock Washer BALUSTERS FORT 3-1/4" 3-1/4" 3/4" from upright 2539-CC 3-1/4" 3-1/4" 3/4" and 3/4" above deck. 3/4" 3/4" 3/4" 3/4" 1-1/4" Wood Screws 2523-CC 5/8 x 3-1/4 x 29-3/4" Install balusters 3/4" above deck.
  • Page 38 BALUSTERS FORT CENTER balusters 3/4" above deck. 3-1/4" 3-1/4" 3-1/4" 3-1/4" 3-1/4" 3-1/4" 1-1/4" Wood screws 2523-CC 5/8 x 3-1/4 x 29-3/4" Install balusters 3/4" above deck. BALUSTER SUPPORTS FORT 1 x 3-1/2 x 12" 2568-CC Large hole DOWN. Large hole UP. 3"...
  • Page 39 BALUSTERS FORT 1-1/4" Wood Screws 5/8 x 3-1/4 x 29-3/4" 2523-CC Flush Flush Install balusters 3/4" above deck. ROOF NOTICE IF YOU HAVE THE WOOD ROOF OPTION REFER TO MANUAL AT THIS TIME. IF YOU HAVE THE VINYL CANOPY ROOF CONTINUE AS FOLLOWS.
  • Page 40 This space intentionally left blank. VINYL ROOF FRAME 1-1/2 x 3-1/2 x 47-1/8" 3" Wood Screws 2517-CC Flush 3/4" 2518-CC 1 x 3-1/2 x 47-1/8" Pre-drill 1/8" x 1" deep for screws to avoid splitting.
  • Page 41 CANOPY INSTALL 2443 End Rail INSTALL SCREWS WITH #3 PHILLIPS BIT 3/4" Pan Head Screw (x10) 3/16" x 1" Fender Washer (x10) Install screws through hem for strength. Fold tarp under canopy end rail.
  • Page 42 SWINGS INSTALL Attach Playset Plaque using one 1" philips head screw (provided) at each corner of plaque. 2630 2435 TRAPEZE 2434 2434 SWING SWING 53" Adjust chains at Top 8" 8" Minimum when occupied. Adjust chains at Top.

  • Page 43: Steering Wheel

    STEERING WHEEL INSTALL Install 2603 aligned with swing beam inside fort. Flat Washer DO NOT OVER-TIGHTEN LAG BOLT 1-1/2" Lag Bolt Wheel Cap 2603 TELESCOPE INSTALL 1-1/4" Screws Telescope 2073 Telescope Bracket Any Top Rail...

  • Page 44: Left Side

    INSTALL STAKES 1/4 x 2-1/2" Lag Bolts SWING BEAM SIDE 2601-A 1/4 x 2-1/2" Lag Bolts Install stakes into 3x3" uprights. Locate stakes as shown. 2601-A Make sure all base pieces and uprights are resting It may be necessary to loosen the soil beneath Playset to make everything level.

  • Page 45: Safety Handles

    SURFACING MATERIAL SLIDE (not included) Apply Surfacing Material at recommended depth, or deeper. SAFETY HANDLES INSTALL 1-1/2" Lag Bolt Flat Washer 2405 DO NOT OVER-TIGHTEN LAG BOLTS.
  • Page 46 CLIMBING ROPE INSTALL OPTIONAL: Tie several single knots in locations to allow logical hand-grab points. Step 1 Feed top of Climbing Rope through front of Upper Rail ( 2526-CC) and tie a double knot on the back side ( Fig. 1) Step 2 Feed lower end of Climbing Rope through hole in Rock Wall board ( 2527-CC ) and tie...
  • Page 47 ACCESSORIES NOTICE IF YOU HAVE MONKEY BAR OR ACTIVITY TABLE REFER TO MANUAL AT THIS TIME.

  • Page 48: Warranty

    Systems. Labor warranty does NOT apply to Do-It-Yourself playset kits or kits installed by a third party. Backyard Play Systems will repair, replace or pay for the affected part at our discretion. In no event shall Backyard Play Systems pay the cost of labor or installation or any other costs related thereto.
  • Page 49 Backyard Play Systems does not assume, or authorize any person to assume for us, any other liability in connection with the sale of our products.
  • Page 50 2695 - NOTICE - This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! STOP! IMPORTANT: THIS MANUAL SUPERCEDES THE MANUAL PACKED IN YOUR KIT. USE IT TO ASSEMBLE YOUR MONKEY BARS! NOTE: YOU MAY HAVE EXTRA FASTENERS AFTER FINISHING ASSEMBLY.
  • Page 51 (This page intentionally left blank.)

  • Page 52: Before You Begin

    2695 02/08/2013 Customer Service Backyard Play Systems Model 3315 1-866-890-2211 1000 Ternes Monkey Bar Accessory Monroe, MI 48162 Recommended for Ages 3 to 11 - BEFORE YOU BEGIN - Tools Required Adult Assistance required First... Assistance is necessary to handle, Check with your homeowner’s association before...
  • Page 53 M O N K E Y B A R P A R T S L I S T End Ladder Angle Brace Stake + 1/4 x 1-1/2” Lag Bolt 1-1/2 x 3-1/2 x 57" 1016-CC 2601-B End Ladder Bottom Support 1-1/2 x 3-1/2 x 80-1/2"...

  • Page 54: Actual Size

    M O N K E Y B A R H A R D W A R E - NOTICE - Depending on your playset model, you will have extra hardware left over. 3/8" FLAT WASHER 3/8" x 1-3/4" 3/8" T NUT BUTTON HD.
  • Page 55 MONKEY BAR METAL PARTS 18-1/2" 21-1/2" Flat Metal Bracket L-Bracket Top Rung End Rung 2023 2084 2152 2153 FASTENERS FOR METAL RUNGS 2-1/2" Lock 1/4" Washer Pan Head Screw Space intentionally left blank.
  • Page 56 PLAYSET ORIENTATION BACK SIDE 6' SAFETY AREA REFER TO PLAYSET RIGHT SIDE INSTRUCTION MANUAL LEFT SIDE FOR SAFETY AREA 6' SAFETY AREA FRONT SIDE TOP RAIL MONKEY BARS 1" x 18-1/2" 1-1/2 x 3-1/2 x 78" 2-1/2" Pan Head Screw 2152 2154-CC 1/4"...
  • Page 57 END RAIL ASSEMBLY 2 x 4 x 81-1/16" 2-1/2" Pan Head Screw 1 x 21-1/2" 2155-CC 2153 1/4" Lock Washer Ensure holes face downward when installing ladder rungs. ASSEMBLY TOP RAIL / BRACKETS Flat Washer 1-1/2 x 3-1/2 x 78" 2154-CC Lock Washer 2023...
  • Page 58 END LADDER / TOP LADDER ASSEMBLE END RAIL Flat Washer Lock Washer 1-3/4" Button Head Screw T-Nut 3-1/2" Hex Bolt TOP RAIL Lock Washer Flat Washer T-Nut 1-3/4" Button Head Screw T-Nut Lock Washer Flat Washer Flat Washer Lock Washer 3-1/2"...
  • Page 59 INSTALL ANGLE BRACES / BOTTOM SUPPORT Flat Washer Lock Washer 3-3/4" Hex Head Bolt (x2) T-Nut 1-1/2 x 3-1/2 x 57" 1016-CC 2-1/2" Hex Head Bolt (x2) Lock Washer Flat Washer 4-1/2" Hex Head Bolt (x2) T-Nut 1019-CC 1-1/2 x 3-1/2 x 80-1/2" 2-1/2"...
  • Page 60 MONKEY BAR INSTALL POSITION * USE CARE WHEN INSTALLING MONKEY BAR ASSEMBLY SLIDE SIDE SWING BEAM SIDE * TWO PEOPLE AND A STEP LADDER ARE RECOMMENDED FOR THIS STEP MONKEY BAR INSTALL - STEP 1 10" FROM INSIDE OF *Hint – Clamp Monkey Bar Assembly Flush at in place while marking holes.
  • Page 61 MONKEY BAR INSTALL - STEP 2 Drill-Through 3/16" marked locations. Re-Drill through using 7/16" bit from inside fort. MONKEY BAR INSTALL - STEP 3 Flush at Flat Lock Washer T-Nut Washer 1-1/4" Hex Bolt (x2)
  • Page 62 INSTALL STAKES 1/4 x 1-1/2" Lag Bolts 2601-B Space intentionally left blank.

  • Page 63: Warranty

    Systems. Labor warranty does NOT apply to Do-It-Yourself playset kits or kits installed by a third party. Backyard Play Systems will repair, replace or pay for the affected part at our discretion. In no event shall Backyard Play Systems pay the cost of labor or installation or any other costs related thereto.
  • Page 64 Backyard Play Systems does not assume, or authorize any person to assume for us, any other liability in connection with the sale of our products.
  • Page 65 2694 - NOTICE - This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! STOP! Call Us First! DO NOT RETURN TO STORE. For immediate help with assembly or product information call our toll-free number: 1-800-437-0784 April through October M - F 8:00 AM to 6:00 PM EST...
  • Page 66 (This page intentionally left blank.)
  • Page 67 2694 11/19/2012 Backyard Play Systems Model 3314 Customer Service 1-866-890-2211 1000 Ternes Cedar Roof Accessory Monroe, MI 48162 Recommended for Ages 3 to 11 - BEFORE YOU BEGIN - Tools Required Adult Assistance required First... Assistance is necessary to handle, Phillips Bit ...
  • Page 68 W O O D P A R T S 3/4 x 5-1/2 x 51-1/8" Roof Slat Top 5/8 x 3-1/4 x 17-1/16" 2582-CC 2595-CC Dormer Cap Top 3/4 x 5-1/2 x 51-1/8" 5/8 x 3-1/4 x 16-5/8" Roof Slat Mid 2583-CC 2596-CC Dormer Cap Bottom...
  • Page 69 ROOF FRAME INSTALL 1-1/2 x 3-1/2 x 47-1/8" Flush 3" Wood Screws 2517-CC 3/4" 2518-CC 1 x 3-1/2 x 47-1/8" Pre-drill 1/8" x 1" deep for screws to avoid splitting. SUN DECORATION INSTALL Pre-drill 1/8" pilot holes. 1 x 5-1/2 x 13-3/16" 2933-CC 2500-CC 1-3/4"...
  • Page 70 SUN DECORATION INSTALL Install 2931-CC centered and flush using two 1-3/4" screws as shown. Pre-drill with 1/8" pilot holes. Measure and mark rafter as shown. Install each 2932-CC between marks using two 1-3/4" screws. Repeat installation of 2931-CC and 2932-CC at opposite side of playset. 1 x 2 x 20-3/8"...
  • Page 71 ROOF PLANKS INSTALL 1-3/4" Wood Screws BEGIN HERE Install all roof boards Flush. Insert panels fully 3/4 x 5-1/2 x 51-1/8" seated. 2583-CC 3/4 x 5-1/2 x 51-1/8" 2583-CC ROOF PLANKS INSTALL 1-3/4" Wood Screws 3/4 x 5-1/2 x 51-1/8" 2583-CC BEGIN HERE 3/4 x 5-1/2 x 51-1/8"...
  • Page 72 ROOF TOP CAPS INSTALL Install 2585-CC using 1-3/4" screws as shown. Pre-drill with 1/8" pilot holes. 1-3/4" Wood Screws Flush 5/8 x 3-1/4 x 51-1/8" 2585-CC DORMER ASSEMBLE BUILD TWO IDENTICAL DORMERS Align brace of 3166-CC flush with right frame of 3167-CC. Ensure flush at peak, all along edge and at corner. Attach 3166-CC using #8 1-3/4"...
  • Page 73 DORMER ASSEMBLE BUILD TWO IDENTICAL DORMERS Align brace of 3165-CC flush with left frame of 3167-CC. Ensure flush at peak, all along edge and at corner. Attach 3165-CC using #8 1-3/4" screws into middle of 3167-CC left frame. Flush Flush 2 x 14-1/4 x 24-1/4"...
  • Page 74 DORMER ASSEMBLE BUILD TWO IDENTICAL DORMERS Ensure 2595-CC is flush at end and along edge of of roof plank. Attach 2595-CC using #8 1-3/4" screws into roof plank as shown Flush at End. Flush along 5/8 x 3-1/4 x 17-1/8" Edge.
  • Page 75 DORMER INSTALL Attach assembled dormer using #8 2" screws into roof planks as shown. Install screws through dormer roof frame (Fig. 1). 2" Wood Screw Align bottom of dormer frame with top of 2nd roof plank. (Fig. 1) STOP RETURN TO PLAYSET INSTRUCTION MANUAL.
  • Page 76 Systems. Labor warranty does NOT apply to Do-It-Yourself playset kits or kits installed by a third party. Backyard Play Systems will repair, replace or pay for the affected part at our discretion. In no event shall Backyard Play Systems pay the cost of labor or installation or any other costs related thereto.
  • Page 77 Backyard Play Systems does not assume, or authorize any person to assume for us, any other liability in connection with the sale of our products.

This manual is also suitable for:

3323

Table of Contents