Standard Horizon QUANTUM GX5500S Owner's Manual page 55

tory." This directory uses the "Individual Direc-
tory" information.
4. Turn the CHANNEL selector knob to select a
name in the directory, then press the [ ENT ] key.
5. Press the [ ENT ] key again to send your posi-
tion to the selected vessel.
6. Press the [ CLR ] key twice to return to the "Ra-
dio Setup dio Setup
dio Setup dio Setup dio Setup" menu, then press the [ CLR ] key
again to return to radio operation.
Manual Calling
You may enter an MMSI number manually to contact without the Setting up the
Individual / Position Call Directory.
1. Press the [ CALL ( MENU )] key. The "DSC Call
Menu Menu Menu" will appear in the display.
Menu Menu
2. Turn the CHANNEL selector knob to select the
"Pos Report Pos Report." Pos Report Pos Report Pos Report
3. Press [ ENT ] key to show the "Position Send
Directory." This directory uses the "Individual
Directory" information.
4. Turn the CHANNEL selector knob to select
Manual Manual
Manual," then press the [ ENT ] key. Manual
"Manual
5. Enter the MMSI number (nine digits: first digit
permanently set to "0") which you want to con-
tact by the keypad, then press the [ ENT ] key.
6. If a mistake was made entering in the MMSI
number repeat pressing the [ H/L ] key until the wrong
number is selected, then enter the correct number.
7. When finished entering the MMSI number, press and
hold the [ ENT ] key.
8. Press the [ ENT ] key to send your position to the
selected vessel.
GX5500S
Ra- Ra- Ra- Ra-
DSC Call DSC Call DSC Call
DSC Call
Page 55