Simfer MIDI OVEN 45 LT User Manual page 15

the program is running.
We have seen in the example above that the automatic cooking process can be
immediately started by setting the cooking time. By pressing the button "M" three
times, you can see and adjust, if necessary, the time when the food is ready (end of
cooking). In the example below, the food in the oven is set to be ready at 21:30.
1) Pressing the button "M" three times. The 'End' signal and the time when the food
is ready will be shown one after another, 18:30+2:15=20:45.
2) Set the end of cooking time using
the buttons + or
In this case, we have programmed our oven so that your food will be ready at 21:30.
We have programmed the cooking time before to 2 hours and 15 minutes. In this case,
the oven starts cooking at 19:15 and will cook for 2 hours and 15 minutes and the
cooking program will finish at 21:30.
The screen to be displayed
when cooking starts
When the cooking program has finished, the buzzer is activated and it will play for 7
minutes if not silenced.
1) Turn off the oven.
Note: The oven will be deactivated until you switch your timing
module to manual mode.
In the example above, first the cooking time is set and the end of cooking
time automatically calculated
3)In a few seconds, the screen will
show the current time
The screen to be displayed when cooking
finishes
2) Reset the oven time.
14