Changing Values For A Cooking Programme - Miele DG 2740 Operating And Installation Instructions

Operation
Cleaning the steam oven
 If necessary, remove the condensate
tray from the oven compartment and
empty it.

Risk of injury due to hot water.
At the end of a cooking programme,
hot water left in the steam generator
is pumped back into the water
container.
Take care not to tip the water
container when taking it out of the
appliance.
 Remove the water container.
 Remove the spill guard and empty
the water container.
 After each use, clean and dry the
whole appliance as described in
"Cleaning and care".
Make sure the spill guard engages
correctly when installing it.
 Leave the appliance door open until
the oven interior is completely dry.
Refilling the water
Insufficient water during a cooking
programme is indicated by the flashing
 symbol and a buzzer.
 Remove the water container and fill it
with fresh tap water.
 Push the water container back into
the appliance.
The cooking programme will continue.
26
Changing values for a cooking
programme
As soon as a cooking programme is in
progress, you can change the
temperature and cooking duration for
this programme.
Changing the temperature
 Touch OK once.
The display will change to the
temperature setting and the
temperature will flash.
 Touch the  or  sensor to change
the temperature.
 Confirm with OK.
Changing the cooking duration
 Touch OK twice.
The display will change to setting the
cooking duration and the number for
the hours will flash.
 Touch the  or  sensor to change
the cooking duration.
 Confirm with OK.