General - Vacon NX OPTC7 User Manual

GENERAL

1. GENERAL
Instead of sending and receiving information to and from frequency converters through I/O, you can
connect them to a fieldbus.
Vacon NX frequency converters can be connected to the DeviceNet using a fieldbus board. The
converter can then be controlled, monitored and programmed from the Host system.
If you purchase your DeviceNet Option Board separately, please note that the it shall be installed in
slot E on the control board of the frequency converter.
Internal components and circuit boards are at high potential when the frequency
converter is connected to the power source. This voltage is extremely dangerous
and may cause death or severe injury if you come into contact with it.
WARNING!
NOTE! You can download the English and French product manuals with applicable safety,
warning and caution information from www.vacon.com/downloads.
REMARQUE Vous pouvez télécharger les versions anglaise et française des manuels produit
contenant l'ensemble des informations de sécurité, avertissements et mises en garde
applicables sur le site www.vacon.com/downloads.
24-hour support +358 (0)40 837 1150 • Email: vacon@vacon.com
vacon • 3